美国阀门知识(美标阀门)
Valve Knowledge
一、阀门结构种类、材质、认证
Valve Design, Materials, and Approvals
阀门结构种类
Valve Design Choices
1. 多回转阀门
1. Multi-Turn
a) 闸阀
a) Gate
b) 截止阀/角-截止阀
b) Globe/Angle-Globe
2. 90o回转阀门
2. Quarter-Turn
a) 球阀
a) Ball
b) 蝶阀－弹性阀座
b) Butterfly-resilient seated
3. 止回阀（阻止倒流）
3. Check (backflow prevention)
a) 旋启式
a) Swing
b) 升降式
b) Lift
c) 弹簧驱动式
c) Spring-actuated
4. 连接端口
4. End connections
材质
Materials
1. 青铜（压力150 psi下温度可达287oC；温度65oC下压力可达600 psi），通径范围：DN8至DN80
1. Bronze (up to 550°F at 150 psi/up to 600 psi at 150°F) 1/4"-3"
2. 铸铁（压力250 psi下温度可达232oC；温度37oC下压力可达500 psi），通径范围：DN50至DN600
2. Cast Iron (up to 450°F at 250 psi/up to 500 psi at 100°F) 2"-24"
3. 球墨铸铁（压力125 psi下温度可达343oC；温度37oC下压力可达600 psi），通径范围：DN50至DN300
3. Ductile Iron (up to 650°F at 125 psi/up to 600 psi at 100°F) 2"-12"
4. 不锈钢（压力125 psi下温度可达343oC；温度37oC下压力可高达2000 psi），通径范围：DN8至DN300
4. Stainless Steel (up to 650°F at 125 psi/up to 2000 psi at 100°F) 1/4"-12"
认证
Approvals
1. 美国阀门和管件制造商标准化协会（MSS）
1. Manufacturers Standardization Society (MSS)
2. 消防安全认证（UL®和FM）
2. Fire protection (UL® and FM)
3. 州立标准和地方标准
3. State and local codes.
二、阀门选型、功能，及管道系统的主要因素
Function and service considerations
选型
Selection
在建筑物管道系统中，阀门起着控制流体的作用。由于结构和材质的不同，因此制造出的阀门也就各不相
同。
Valves serve the purpose of controlling the fluids in building services piping. Valves are
produced in a variety of design types and materials.
为了保证管道系统能够实现最高的效率，最低的成本和最长的使用寿命，阀门的正确选型至关重要。
Proper selection is important to ensure the most efficient, cost-effective and long-lasting
systems.
功能
Function
阀门具有四种主要功能：
Valves are designed to perform four principal functions:
1. 启动和阻止介质流动
1. Starting and stopping the flow
2. 调节（节流）介质流量
2. Regulating (throttling) the flow
3. 阻止倒流或回流
3. Preventing reversal of the flow
4. 调节或泄放流体压力
4. Regulating or relieving the pressure of the flow
管道系统的主要因素
Service Considerations
1. 压力
1. Pressure
2. 温度
2. Temperature
3. 流体介质类型
3. Type of fluid
a) 流体
a) Liquid
b) 气体：例如，蒸汽或空气
b) Gas; i.e., steam or air
c) 杂质或研磨剂（侵蚀性物质）含量
c) Dirty or abrasive (erosive)
d) 腐蚀性
d) Corrosive
4. 介质流动
4. Flow
a) 开启-关闭调节
a) On-off throttling
b) 需要防止倒流或回流
b) Need to prevent flow reversal
c) 关注压降
c) Concern for pressure drop
d) 流速
d) Velocity
5. 工作环境
5. Operating conditions
a) 冷凝
a) Condensation
b) 工作频率
b) Frequency of operation
c) 可接近性
c) Accessibility
d) 外形尺寸/所适用的空间
d) Overall size/space available
e) 手动或自动控制
e) Manual or automated control
f) 需要具有无气泡关闭性能
f) Need for bubble-tight shut-off
三、连接方式
End Connection
a) 螺纹连接的多回转阀门、止回阀和球阀中的连接螺纹多为符合美国国家标准协会ANSI的锥形阴螺纹，通常用
于DN65和DN80管道上。
a) Threaded-end multi-turn valves, check valves and ball valves with ANSI female taper
threads are most commonly used with pipe up to 2 1/2” or 3”.
b) 焊接连接端口可以将通径达DN80的青铜多回转阀门、止回阀和球阀直接连接在铜管上。在焊接过程中，
必须要小心谨慎，避免由于温度过高导致阀门受到损害。
b) Solder-end valves permit directly connecting bronze multi-turn valves, check valves and
ball valves up to 3” to copper tubing. Care must be taken not to overheat and damage valves
during the soldering process.
c) 法兰连接常用于DN50以上的多回转铸铁阀门的安装上。
c) Flanged-end connections are the most common used design for installation of iron multi-
turn valves 2” and larger.
d) 平板（对夹）和凸耳阀体主要用于蝶阀和升降式/双门止回阀上，这种结构的阀门在两个法兰之间安装
容易迅速。
d) Wafer and lug body styles are used with butterfly valves and lift/double-door check valves
for quick, easy installation between two flanges.
e) DN50以上的管状连接端口的球阀、蝶阀和止回阀安装最迅速。
e) Grooved end ball, butterfly and check valves permit the quickest installation sizes 2”
and larger.
四、室内冷热水系统阀门选型
HOT AND COLD DOMESTIC WATER SERVICE SPECIFICATIONS
通径DN65以下的管线控制阀
LINE CONTROL VALVES 2 1/2” AND SMALLER
球阀：
BALL VALVES:
这类阀门具有额定150 psi的安全工作压力，非冲击冷水压力可达600 psi，两件式铸青铜阀体，聚四氟乙
烯阀座，标准流道，分离式压缩螺母，可调节阀杆填料，防吹出阀杆和镀铬黄铜/青铜球体。在需要关注压降的
地方，应采用不缩径全流道球阀或类似结构的阀门。阀门连接端口应该具有足够深度的美国国家标准协会ANSI
螺纹，或加长焊接端口，并按照美国阀门和管件制造商标准化协会MSS-SP110标准制造。
Valves shall be rated 150 psi SWP and 600 psi nonshock CWP and will have 2-pc. cast bronze
bodies, TFE seats, standard port, separate pack nut with adjustable stem packing, anti-blowout
stems and chrome-plated brass/bronze ball. Where pressure drop is a concern, full-port ball
valves of like construction are to be used. Valve ends shall have full depth ANSI threads or
extended solder connections and be manufactured to comply with MSS-SP110.
注：如果管道需要保温隔热或绝缘，那么球阀就要配置耐热绝缘材料的2英寸加长手柄，还需要配置
保护套筒，这样在操作阀门时不会破坏蒸汽密封或保温隔热绝缘层。如果应用在保温隔热绝缘环境，需要具备
可全程调节的操作点记忆功能。
NOTE: Where piping is insulated, ball valves shall be equipped with 2” extended handles of
non-thermal conductive material. Also provide a protective sleeve that allows operation of the
valve without breaking the vapor seal or disturbing the insulation. Memory stops, which are full
adjustable after insulation is applied, shall be included.
闸阀：
GATE VALVES:
明杆：这种阀门工作压力是125磅级和200 psi冷水压力，明杆，管接头式阀盖，实心楔板，并按照美国阀
门和管件制造商标准化协会MSS-SP 80标准制造。阀体，阀盖和楔板材质符合美国材料试验协会ASTM B 62标准
青铜。阀杆材质是符合美国材料试验协会ASTM B 371标准抗失锌现象的硅青铜，或B 99低锌合金，不含石棉的
填料，和可锻或球墨铸铁手轮。如果工作压力比较高，接近150 psi，则应该采用150磅级管接头阀盖或类似结
构的阀门。阀门连接方式应该是螺纹或焊接。
Rising Stem: Valves shall be Class 125 and 200 psi CWP, rising stem, union bonnet, solid
wedge and manufactured in accordance with MSS-SP 80. Body, bonnet and wedge are to be of bronze
ASTM B 62. Stems shall be of dezincification-resistant silicon bronze ASTM B 371 or low-zinc
alloy B 99, non-asbestos packing and malleable or ductile iron handwheel. Where higher operating
pressures approach 150 psi, Class 150 union bonnet valves of like construction will be used.
Valve ends may be threaded or solder-type.
暗杆：这种阀门工作压力是125磅级和200 psi冷水压力，暗杆，螺纹旋进阀盖，实心楔板，并按照美国阀
门和管件制造商标准化协会MSS-SP 80标准制造。阀体，阀盖，外部填料函和楔板材质是符合美国材料试验协会
ASTM B 62标准的青铜。阀杆材质是符合美国材料试验协会ASTM B371标准的抗失锌现象的硅青铜或B 99标准的
低锌合金，不含石棉的填料，可锻或球墨铸铁手轮。如果工作压力比较高，接近150 psi，则应该采用150磅级
管接头阀盖或类似结构的阀门。阀门连接方式应该是螺纹或焊接。
Non-Rising Stem: Valves shall be Class 125 and 200 psi CWP, nonrising stem, screw-in bonnet,
solid wedge and manufactured in accordance with MSS-SP 80. Body, bonnet, external stuffing box
and wedge are to be of bronze ASTM B 62. Stems shall be of dezincification-resistant silicon
bronze ASTM B 371 or low-zinc alloy B 99, nonasbestos packing and malleable or ductile iron
handwheel. Where higher operating pressures approach 150 psi, Class 150 union bonnet valves of
like construction will be used. Valve ends may be threaded or solder-type
截止阀/角阀：
GLOBE/ANGLE VALVES:
这种阀门工作压力是125磅级，并按照美国阀门和管件制造标准化协会MSS-SP 80标准制造；阀体和阀盖材
质是符合美国材料试验协会ASTM B 62标准的青铜。阀杆材质是符合美国材料试验协会ASTM B371标准的抗失锌
现象的硅青铜或B 99标准的低锌合金，不含石棉的填料，聚四氟乙烯阀座阀瓣，可锻或球墨铸铁手轮。如果工
作压力比较高，接近150 psi，则应该采用150磅级管接头阀盖或类似结构的阀门。阀门连接方式应该是螺纹或
焊接。
Valves shall be Class 125 and manufactured in accordance with MSS-SP 80; body and bonnet are
to be of bronze ASTM B 62. Stems shall be of dezincification-resistant silicon bronze ASTM B 371
or low-zinc alloy B 99, non-asbestos packing,
TFE seat disc and malleable or ductile iron handwheel. Where higher operating pressures approach
150 psi, Class 150 union bonnet valves of like construction will be used. Valve ends may be
threaded or solder type.
通径DN65以上的管线控制阀
LINE CONTROL VALVES 2 1/2” AND LARGER
蝶阀：
BUTTERFLY VALVES:
这类阀门应该是凸耳或国际管道标准I.P.S.管状连接端口阀体，并按照美国阀门和管件制造商标准化协会
MSS-SP67标准制造；通径DN50～DN300的阀门额定工作压力是200 psi非冲击冷水，DN350以上是150 psi。用于
保温隔热绝缘的阀体具有2英寸的加长管径，材质是铸铁或球墨铸铁。蝶板材质是铝青铜合金，配置三元乙丙橡
胶阀座和密封；或三元乙丙橡胶涂层蝶板，配置聚合物涂层阀体。阀杆应该是400系列不锈钢，不能将阀杆暴露
在蝶板紧固件上。通径DN65至DN150应该配置具有10个位置节流板的操作手柄；通径DN200以上的蝶阀应该配置
齿轮操作机构。凸耳结构和开槽结构蝶阀应该能够用作隔断阀，而且不需要下游法兰也可以在全压力下用作管
道终端。
Valves shall be lug or I.P.S. grooved body style manufactured in accordance with MSS-SP67; 2"
- 12" rated at least 200 psi non-shock cold water working pressure, 14" and larger rated at 150
psi. Body to have 2" extended neck for insulating and to be cast iron or ductile iron. Valve to
have aluminum bronze alloy disc with EPDM rubber seat and seals; or EPDM rubber encapsulated disc
with polymer-coated body. Stem shall be 400 series stainless steel and shall not have exposed
stem to disc fasteners. Sizes 2 1/2"-6" shall be lever operated with 10-position throttling
plate; sizes 8" and larger shall have gear operators. Lug-style and grooved style shall be
capable for use as isolation valves and recommended by manufacturer or dead-end service at full
pressure without the need for downstream flanges.
闸阀，截止阀/角阀：
GATE, GLOBE/ANGLE VALVES:
这些阀门工作压力为125磅级，并按照美国阀门与管件制造商标准化协会MSS-SP70（闸阀）标准或MSS-SP85
（截止阀/角阀）标准制造，法兰连接，螺栓阀盖，OS&Y，铸铁阀体，青铜阀内件，阀体和阀盖材质符合美国材
料试验协会ASTM A 126级别B铸铁标准，填料和衬垫不含石棉。
Valves to be Class 125 manufactured in accordance with MSS-SP70 (gate) or MSS-SP85
(globe/angle), flanged, bolted bonnet, OS&Y, iron body, bronze trimmed, with body and bonnet
conforming to ASTM A 126 class B cast iron. Packing and gaskets to be non-asbestos.
止回阀：
CHECK VALVES:
通径DN65以下的止回阀应该采用Y形旋启式结构，并按照美国阀门和管件制造商标准化协会MSS-SP80标准制
造，工作压力125磅级，符合美国材料试验协会ASTM B 62标准的青铜阀体，配置聚四氟乙烯阀座阀座阀瓣。如
果工作压力比较高，接近150 psi，则应该采用150磅级管接头阀盖或类似结构的阀门。阀门连接方式应该是螺
纹或焊接。
2 1/2”and smaller shall be Y-pattern swing-type manufactured in accordance with MSS-SP80,
Class 125, bronze ASTM B 62 body with TFE seat disc. Where higher operating pressures approach
150 psi, Class 150 valves of like construction shall be used. Valve ends may be threaded or
solder-type.
通径DN65以上的蝶阀应该采用旋启式结构，并按照美国阀门和管件制造商标准协会MSS-SP71标准制造，125
磅级，法兰连接，符合美国材料试验协会ASTM A 126级别B标准的铸铁阀体和青铜阀内件，不含石棉的衬垫。也
可以采用平板式结构，配置不锈钢弹簧，青铜阀瓣，橡胶阀座，符合美国材料试验协会ASTM A 126级别B标准的
铸铁阀体，或A 48标准的125磅级或150磅级法兰。弹簧执行机构止回阀用于管道排放。外置操作手柄和弹簧执
行机构的旋启式止回阀用于污水坑、排污和雨水排泄管道。
2 1/2" and larger shall be swing-type manufactured in accordance with MSS-SP71, Class 125,
flanged ASTM A 126 Class B cast iron body with bronze trim, non-asbestos gasket. Or wafer-style
with stainless steel spring, bronze disc plates, rubber seat, body of cast iron ASTM A 126 Class
B or A 48 for use with Class 125/150 flanges. Spring-actuated valve to be used on pump discharge.
Swing check with outside lever and spring to be used on sump, sewage and storm drain lines.
流量平衡阀门：
CIRCUIT BALANCING VALVES:
用于室内热水管道系统的通径DN15至DN50流量平衡阀应该是美国尼伯科截止阀结构，1710系列。阀门应该
配置用于流量平衡和流量测量的整体测试端口。测试端口应该内置止回阀并配置阀盖。阀门材质应该是抗失锌
现象的黄铜或青铜，压力－温度等级为121oC，240 psi。所有流量平衡阀均配置位置指示器读数，并内置操作
位置记忆装置，用于重复调节和控制。
Circuit Balancing Valves 1/2" to 2" for domestic hot water service shall be NIBCO Globe
Style, Series 1710. Valve shall have integral metering/test ports for flow balancing and flow
measurement. Test ports shall have internal check valve and be equipped with caps. Valves shall
be manufactured from dezincification resistant brass or bronze rated 240 psi at 250°F. All
balancing valves shall have position indication readout and built in memory stop for repeatable
regulation and control.
五、热水暖气系统阀门选型
HOT WATER HEATING SERVICE SPECIFICATIONS
通径DN65以下管线控制阀
LINE CONTROL VALVES 2 1/2" AND SMALLER
球阀：
BALL VALVES:
这类阀门的额定安全工作压力为150 psi，非冲击冷水工作压力为600 psi，两件式铸青铜阀体，聚四氟乙
烯阀座，标准流道，分离式包装螺母，配置可调节阀杆填料，防吹出阀杆和镀铬黄铜/青铜球体。在需要关注压
降的地方，需要采用不缩径全流道球阀或类似结构的阀门。阀门连接端口应该具有足够深度的美国国家标准协
会ANSI螺纹，或加长焊接端口，并按照美国阀门和管件制造商标准化协会MSS-SP110标准制造。
Valves shall be rated 150 psi SWP and 600 psi non-shock CWP and will have 2-pc. cast bronze
bodies, TFE seats, standard port, separate packnut with adjustable stem packing, anti-blowout
stems and chrome-plated brass/bronze ball. Where pressure drop is a concern, full-port ball
valves of like construction are to be used. Valve ends shall have full depth ANSI threads or
extended solder connections and be manufactured to comply with MSS-SP110
注：如果管道需要保温隔热或绝缘，那么球阀就要配置耐热绝缘材料的2英寸加长手柄，还需要配置
保护套筒，这样在操作阀门时不会破坏蒸汽密封或保温隔热绝缘层。如果应用在保温隔热绝缘环境，需要包括
可全程调节的操作点记忆功能。
NOTE: Where piping is insulated, ball valves shall be equipped with 2" extended handles of
non-thermal conductive material. Also, provide a protective sleeve that allows operation of the
valve without breaking the vapor seal or disturbing the insulation. Memory stops, which are fully
adjustable after insulation is applied, shall be included.
闸阀：
GATE VALVES:
明杆：这种阀门工作压力是125磅级，明杆，管接头式阀盖，实心楔板，并按照美国阀门和管件制造商标准
化协会MSS-SP 80标准制造。阀体，阀盖和楔板材质符合美国材料试验协会ASTM B 62标准青铜。阀杆材质是符
合美国材料试验协会ASTM B 371标准抗失锌现象的硅青铜，或B 99低锌合金，不含石棉的填料，和可锻或球墨
铸铁手轮。
Valves shall be Class 125 rising stem, union bonnet, solid wedge and manufactured in
accordance with MSS-SP80. Body, bonnet and wedge are to be of bronze ASTM B 62. Stems shall be of
dezincification-resistant silicon bronze ASTM B 371 or low-zinc alloy B 99, non-asbestos packing
and malleable or ductile iron handwheel. Valve ends may be threaded or solder type.
截止阀/角阀：
GLOBE/ANGLE VALVES:
这种阀门工作压力是125磅级，并按照美国阀门和管件制造标准化协会MSS-SP 80标准制造；阀体和阀盖材
质是符合美国材料试验协会ASTM B 62标准的青铜。阀杆材质是符合美国材料试验协会ASTM B371标准的抗失锌
现象的硅青铜或B 99标准的低锌合金，不含石棉的填料，聚四氟乙烯阀座阀瓣，可锻或球墨铸铁手轮。
Valves shall be Class 125 and manufactured in accordance with MSS-SP80, body and bonnet are
to be of bronze ASTM B 62. Stems shall be of dezincificationresistant silicon bronze ASTM B 371
or low-zinc alloy B 99, non-asbestos packing, TFE seat disc and malleable or ductile iron
handwheel
通径DN65以上的管线控制阀
LINE CONTROL VALVES 2 1/2” AND LARGER
蝶阀：
BUTTERFLY VALVES:
这类阀门应该是凸耳或国际管道标准I.P.S.管状连接端口阀体，并按照美国阀门和管件制造商标准化协会
MSS-SP67标准制造；通径DN50～DN300额定工作压力是200 psi非冲击冷水，DN350以上是150 psi。用于保温隔
热绝缘的阀体具有2英寸的加长管径，材质是铸铁或球墨铸铁。蝶板材质是铝青铜合金，配置三元乙丙橡胶阀座
和密封；或三元乙丙橡胶涂层蝶板，配置聚合物涂层阀体。阀杆应该是400系列不锈钢，不能将阀杆暴露在蝶板
紧固件上。通径DN65至DN150应该配置具有10个位置节流板的操作手柄；通径DN200以上的蝶阀应该配置齿轮操
作机构。凸耳结构和管状结构蝶阀应该能够用作隔断阀，而且不需要下游法兰也可以在全压力下用作管道终端
。
Valves shall be lug or I.P.S. grooved body style manufactured in accordance with MSS-SP67;
2"-12" rated at least 200 psi non-shock cold water working pressure, 14" and larger rated at 150
psi. Body to have 2" extended neck for insulating and to be cast iron or ductile iron. Valve to
have aluminum bronze alloy disc with EPDM rubber seat and seals; or EPDM rubber encapsulated disc
with polymer-coated body. Stem shall be 400 series stainless steel and shall not have exposed
stem to disc fasteners. Sizes 2 1/2"-6" shall be lever operated with 10-position throttling
plate; sizes 8" and larger shall have gear operators. Lug-style and grooved style shall be
capable for use as isolation valves and recommended by manufacturer or dead-end service at full
pressure without the need for downstream flanges.
闸阀，截止阀/角阀：
GATE, GLOBE/ANGLE VALVES:
这些阀门工作压力为125磅级，并按照美国阀门与管件制造商标准化协会MSS-SP70（闸阀）标准或MSS-SP85
（截止阀/角阀）标准制造，法兰连接，螺栓阀盖，OS&Y，铸铁阀体，青铜阀内件，阀体和阀盖材质符合美国材
料试验协会ASTM A 126级别B铸铁标准，填料和衬垫不含石棉。
Valves to be Class 125 manufactured in accordance with MSS-SP70 (gate) or MSS-SP85
(globe/angle), flanged, bolted bonnet, OS&Y, iron body, bronze trimmed, with body and bonnet
conforming to ASTM A 126 Class B cast iron. Packing and gaskets to be non-asbestos.
止回阀：
CHECK VALVES:
通径DN65以下的止回阀应该采用Y形旋启式结构，并按照美国阀门和管件制造商标准化协会MSS-SP80标准制
造，工作压力125磅级，符合美国材料试验协会ASTM B 62标准的青铜阀体，配置聚四氟乙烯阀座阀座阀瓣。
2 1/2"and smaller shall be Y-pattern swing-type manufactured in accordance with MSS-SP80,
Class 125, bronze ASTM B 62 body with TFE seat disc.
通径DN65以上的止回阀应该采用旋启式结构，并按照美国阀门和管件制造商标准协会MSS-SP71标准制造，
125磅级，法兰连接，符合美国材料试验协会ASTM A 126级别B标准的铸铁阀体和青铜阀内件，不含石棉的衬垫
。也可以采用平板式结构，配置不锈钢弹簧，青铜阀瓣，橡胶阀座，符合美国材料试验协会ASTM A 126级别B标
准的铸铁阀体，或A 48标准的125磅级或150磅级法兰。
2 1/2" and larger shall be swing-type manufactured in accordance with MSS-SP71, Class 125,
flanged ASTM A 126 Class B cast iron body with bronze trim, non-asbestos gasket. Or wafer-style
with stainless steel spring, bronze disc plates, rubber seat, body of cast iron ASTM A 126 Class
B or A 48 for use with Class 125/150 flanges.
六、喷洒灭火器和消防系统阀门选型
FIRE SPRINKLER AND FIRE PROTECTION SYSTEM SPECIFICATIONS
通径DN65以下管线控制阀
LINE CONTROL VALVES 2 1/2" AND SMALLER
闸阀：
GATE VALVES:
额定水工作压力应该在175 psi以上，阀体和阀盖材料为符合美国材料试验协会ASTM B 62标准的铸青铜合
金。阀门结构为OS&Y和螺纹连接。阀门应获得美国UL认证、FM认证，并符合美国阀门和管件制造商标准化协会
MSS-SP80标准。
Shall have approval rating 175 psi WWP or greater with body and bonnet made from cast bronze
alloy ASTM B 62. Valve to be of OS&Y design with threaded ends. Valve to be Underwriters
Laboratories® listed, Factory Mutual Approved and in compliance with MSS-SP80.
球阀：
BALL VALVES:
额定水工作压力应该在175 psi以上，并采用聚四氟乙烯阀座。这类阀门应该配置不受气候影响的齿轮执行
机构，可用于室内/室外，具有上升位置指示器和两个内置监控开关。这类阀门应该是螺纹连接或开槽连接，并
获得美国UL认证、FM认证，并符合美国阀门和管件制造商标准化协会MSS-SP110标准。
Shall have approval rating 175 psi WWP or greater with TFE seats. Valve to have weatherproof
gear operator rated for indoor/outdoor use with raised position indicator and two internal
supervisory switches. Valves shall have threaded or
I.P.S. grooved ends and will be Underwriters Laboratories listed, Factory Mutual Approved and in
compliance with MSS-SP110
通径DN65以上管线控制阀
LINE CONTROL VALVES 2 1/2" AND LARGER
闸阀：
GATE VALVES:
额定水工作压力应该在175 psi以上，铸铁阀体和青铜阀内件，或弹性橡胶密封楔板。阀体和阀盖应该采用
符合美国材料试验协会ASTM A 126级别B的铸铁合金，或ASTM A 536球墨铸铁，配置OS&Y类型的阀盖。如果采用
弹性楔板结构，阀内部就必须用环氧树脂涂覆。阀杆预制开槽管，可在需要时配置监控开关。连接方式为125磅
级法兰连接或开槽连接。这类阀门应该通过美国UL认证、FM认证或符合美国阀门和管件制造商标准化协会MSS-
SP70标准。
Shall have approval rating of 175 psi WWP or greater, iron body with bronze trim or with
resilient rubber encapsulated wedge. Body and bonnet to be of either cast iron alloy ASTM A 126
Class B or ductile iron ASTM A 536 with OS&Y type bonnet. If of resilient wedge design, interior
of valve to be epoxy-coated. Valve stem to be pre-grooved for use with supervisory switch, if
required. Ends to be flanged Class 125 or grooved. Valves to be Underwriters Laboratories listed,
Factory Mutual Approved and in compliance with MSS-SP70.
配置闸阀的指示器柱：
INDICATOR POSTS WITH GATE VALVES:
通径DN100以上的这类闸阀额定水工作压力应该不小于175 psi，配置青铜阀内件和弹性橡胶密封楔板。阀
体和阀盖材质是符合美国材料试验协会ASTM A126级别B标准的铸铁合金或ASTM A536标准的球墨铸铁，配置阀盖
、一体化指示器柱安装法兰。如果采用弹性楔板结构，阀内部就要涂覆环氧树脂。连接端口是125磅级法兰或机
械连接。立式指示器柱是可调节的，适用于深度掩埋。阀门和指示器柱应该获得美国UL认证、FM认证，并且符
合美国阀门和管件制造商标准化协会MSS-SP70标准。
Sizes 4" and larger shall have approval rating of 175 psi WWP or greater with bronze trim or
with resilient rubber encapsulated wedge. Body and bonnet are to be of either cast iron alloy
ASTM A 126 Class B or ductile iron ASTM A 536 with bonnet, incorporating indicator post mounting
flange. If resilient wedge design, interior of valve to be epoxy-coated. Ends to be flanged Class
125 or mechanical joint. Upright indicator post to be adjustable for bury depth required. Valves
and posts to be Underwriters Laboratories listed and Factory Mutual Approved. Where applicable,
valves to be in compliance with MSS-SP70
止回阀：
CHECK VALVES:
这类止回阀额定水工作压力应该不小于175 psi，配置青铜阀内件和橡胶－金属阀座。阀体材质应该是符合
美国材料试验协会ASTM A 126级别B铸铁合金。连接端口应该是法兰或平板式（对夹式）。阀门应该获得美国UL
认证、FM认证，并且符合美国阀门和管件制造商标准化协会MSS-SP71标准。
Shall have approval rating of 175 psi WWP or greater with bronze trim and rubber to metal
seating. Body to be of cast iron alloy ASTM A 126 Class B. Ends to be flanged or wafer for use
with Class 125/150 flanges. Valves to be Underwriters Laboratories listed, Factory Mutual
Approved and, where applicable, in compliance with MSS-SP71.
通径DN65以上的管线控制阀
LINE CONTROL VALVES 2 1/2” AND LARGER
蝶阀：
BUTTERFLY VALVES:
额定水工作压力应该不小于175 psi。阀门应该配置不受气候影响的、可用于室内或室外的、带有手轮的齿
轮执行机构，和凸起的位置指示器和两个内置监控开关。阀体材质采用符合美国材料试验协会ASTM A 395或A
536标准的球墨铸铁，阀杆采用400系列不锈钢。阀门连接方式是平板式（对夹式），可用于在125/150磅级法兰
或IPS管状之间安装连接。这类阀门应该获得美国UL认证、FM认证，并符合美国阀门和管件制造商标准化协会
MSS-SP67标准。
Shall have approval rating of 175 psi WWP or greater. Valve to have weatherproof gear
operator rated for indoor/outdoor use with handwheel and raised position indicator and two
internal supervisory switches. Bodies to be from cast ductile iron ASTM A 395 or A 536 and stems
to be 400 series stainless steel. Valves shall be wafer style for installation between Class
125/150 flanges or I.P.S. grooved. Valves to be Underwriters Laboratories listed, Factory Mutual
Approved and in compliance with MSS-SP67.
高杆闸阀：
HI-RISE SERVICE GATE VALVES:
额定水工作压力不小于300 psi。OS&Y阀盖和阀体材质应该是符合美国材料试验协会ASTM A 126级别B标准
的铸铁合金。阀门连接方式应该是法兰连接，并采用250磅级或300磅级法兰。这类阀门应该通过美国UL认证、
FM认证或符合美国阀门和管件制造商标准化协会MSS-SP70标准。
Shall have approval rating of 300 psi WWP or greater. OS&Y bonnet and body to be of cast iron
alloy ASTM A 126 Class B. Valves to be flanged ends for use with Class 250/300 flanges. Valves to
be Underwriters Laboratories listed, Factory Mutual approved and in compliance with MSS-SP70.
高杆止回阀：
HI-RISE SERVICE GATE VALVES:
额定水工作压力不小于300 psi。这类止回阀应该采用水平旋启式止回阀，配置青铜阀内件，OS&Y阀盖和阀
体材质应该是符合美国材料试验协会ASTM A 126级别B标准的铸铁合金。阀门连接方式应该是法兰连接，并采用
250磅级或300磅级法兰。这类阀门应该通过美国UL认证、FM认证或符合美国阀门和管件制造商标准化协会MSS-
SP70标准。
Shall have approval rating of 300 psi WWP or greater. Valves to be of the horizontal swing
check design with bronze trim and body made from cast iron alloy ASTM A 126 Class B. Valves to be
flanged ends for use with Class 250/300 flanges. Valves to be approved by the New York City
Materials and Equipment Acceptance (M.E.A.) Division and in compliance with MSS-SP71.
通径DN65以下的排水阀
TRIM AND DRAIN VALVES 2 1/2" AND LARGER
球阀：
BALL VALVES:
额定水工作压力不小于175 psi。阀门应配置聚四氟乙烯阀座，螺纹连接，防吹出阀杆和杆状手柄。这类阀
门应该获得美国UL认证、FM认证适用于排水系统，或符合美国阀门和管件制造商标准化协会MSS-SP110标准。
To have approval rating of 175 psi WWP or greater. Valve to have TFE seats, threaded ends,
blowout-proof stem and lever handle. Valve to be Underwriters Laboratories listed and Factory
Mutual Approved for trim and drain service and in compliance with MSS-SP-110.
截止阀/角阀：
GLOBE/ANGLE VALVES:
额定水工作压力不小于175 psi。阀门应该配置橡胶阀座阀瓣和螺纹连接端口。这类阀门应获得美国UL认证
适用于排水系统。
To have approval rating of 175 psi WWP or greater. Valves to have rubber seat disc and
threaded ends. Valves to be Underwriters Laboratories listed for trim and drain service.
止回阀：
CHECK VALVES:
额定水工作压力不小于175 psi。阀门应该配置橡胶阀座阀瓣和螺纹连接端口。阀门应该是Y形水平旋启式
。这类阀门应符合美国阀门和管件制造商标准化协会MSS-SP80标准。
To be rated 175 psi or greater. Valves to have rubber seat discs and threaded ends. Valve to
be Y-pattern horizontal swing-type. Valve shall be in compliance with MSS-SP80.
